HVLPequivalent Guns – Approved By California And Other States

hvlp-equivalent guns – approved by california and other states and accepted by usepa for the hhhhhh neshap (february 2010) california approv

HVLP-equivalent guns – Approved by California and other states and
accepted by USEPA for the HHHHHH NESHAP (February 2010)
California Approvals page
http://www.aqmd.gov/permit/spraytransferefficiency.html
Ohio Approvals page http://www.epa.ohio.gov/dapc/regs/3745_21/hvlp_electro.aspx
DISCLAIMER: This list is based on the best information currently
available. The list will be updated as time allows but the reader
should understand that the list may not be complete or current. It is
the reader’s responsibility to obtain current documentation of claims
and requirements from the manufacturer/supplier and appropriate
governments. Contact [email protected] to suggest updates to
the list.
IMPORTANT NOTE: The different state approvals are provided so that
shops in areas of those states which are subject to state VOC
requirements can understand how one gun set-up can comply with both
the federal NESHAP and the applicable state rule.
→ In all other areas in all other states the California/USEPA
approvals will ensure compliance with the federal NESHAP.
Gun
California VOC and USEPA HHHHHH NESHAP
Ohio VOC
Indiana VOC
KEY Operating Requirements
← See approval letters linked from the X in each state’s column for
details of operating requirements.
SATAjet 3000 B RP/SATAjet 3000 RP (digital and non-digital; “B”
indicates gravity-feed)
X
≤35 psi inlet pressure; psi limit label on gun; inlet gauge must be
supplied and in use
ITW DeVilbiss GFG-670 Plus
X
X
≤40 psi inlet pressure; psi limit label on gun; inlet gauge and
control valve must be supplied and in use
ANEST IWATA W400-LV
X
X
X
≤20 psi inlet pressure; psi limit label on gun; inlet gauge must be
supplied and in use
DeVilbiss CVI High Efficiency
X
X
with #510 air cap
X
with #510 air cap
≤26 psi inlet pressure; psi limit label on gun; inlet gauge must be
supplied and in use
DeVilbiss GTI Pro High Efficiency
X
X
with T2 air cap
≤26 psi inlet pressure; psi limit label on gun; inlet gauge must be
supplied and in use
DeVilbiss ITW Tekna High Efficiency
X
X
with 7E7 air cap
≤22 psi inlet pressure; psi limit label on gun; inlet gauge must be
supplied and in use
Graco/3M Compliant
X
≤29 psi inlet pressure; psi limit label on gun; inlet gauge and
control valve must be supplied and in use
SATAjet RP & RP Digital 2
X
X
X
≤35 psi inlet; psi limit label on gun; inlet gauge must be supplied
and in use