systems of filing and indexing 1. introduction as you know, office work involves preparation and maintenance of records and

Systems of Filing and Indexing
1.
Introduction
As you know, office work involves preparation and maintenance of
records and
making them available as and when necessary. Records include letters,
vouchers,statements, reports, invoices, telegrams etc. All these are
to be preserved for future reference. The two aspects of management of
records are ‘filing’ and ‘indexing’. Filing is the process of
organising the documents and records in a proper sequence. Indexing is
the device for locating documents which have been filed. In this
lesson, you will study about the meaning, objectives and functions of
filing, classification and methods of filing, and the meaning, purpose
and types of indexing.
2.
Objectives
After studying this lesson, you will be able to :
explain the meaning, objectives and functions of filing systems;
compare the relative advantages and disadvantages of centralized and
Departmental filing systems;
describe the basis of classification of files and different methods
of
Filing; and
Explain the meaning, purpose and types of indexing systems.
Systems of Filing and Indexing::
30.3 Filing Systems — Meaning Objectives and Functions
As a primary source of information, all office records need to be
preserved for
future reference. Filing serves the purpose of preserving records in
all offices.
Documents and papers are filed and made available on requirement.
Filing is
the process of organizing the correspondence and records in a proper
sequence
so that they can be easily located. The term filing may this be
defined as
the process of so arranging and storing original records or copies of
them, that they can be readily located when required. In other words,
filing is the process of arranging and storing records so that they
can be easily
located. It involves placing of documents and papers in acceptable
containers
according to some predetermined arrangement so that any of them when
required may be located quickly and conveniently.
Objectives
The major objectives of filing process are to ensure proper
arrangements, careful
storing and easy availability of records. An efficient filing system
is expected
to have the following objectives:
i) To classify and arrange records properly.
ii) To protect documents against possible loss or damage.
iii) To provide a method of obtaining information without loss of
time.
iv) To enable past records to be made easily available to management
for
framing business policies and future plans.
Functions
The functions of a filing system are as follows:
1. Classification of documents on a pre-determined basis.
2. filing of letters and other documents after action taken in
cardboard file
covers or folders.
3. Preservation of file covers or folders in cabinets fitted with
drawers.
4. Issue of files on requisition by any department.
5. Transfer of papers no longer in current use from the existing files
to
separate folders or box files at regular intervals for possible future
use.
6. Disposal of old papers and records when these are no longer useful.
50 :: Commerce (Business Studies)
Essentials of a good filing system
The system of filing must achieve its objectives. The following are
the chief
characteristics of a good filing system.
1. Simplicity
The system should be simple so that the employees concerned may
operate it without any difficulty.
2. Accessibility
The system should enable files to be easily located and papers to be
inserted in files without disturbing the arrangement.
3. Compactness
The filing section should occupy reasonable space in view of the cost
implication of large space.
4. Economy
The cost of installation and operation of the system should be
proportionate to the benefits derived from it.
5. Flexibility
The system should be capable of expansion as the activities of the
organisation expand.
6. Safety
The records should be safe and available whenever they are needed.
There should not be any danger regarding insects, rain and
mishandling.
7. Retention
There should be a well-defined policy of retaining or discarding the
papers and records. Dead material must be discarded periodically.
8. Classification
Most suitable method of classification should be adopted. Too many
miscellaneous files and bulky files must be avoided.
Centralised Vs. Decentralised Filing
In any large organisation the office manager has to take a vital
decision regarding
the organisation of the filing system i.e. whether the filing system
should be
centralised or decentralised.
Centralised Filing
Under centralised filing system, a separate department known as ‘filing
Systems of Filing and Indexing :: 51A
department’ is created and all the files and records of the office are
preserved
in this department.
Decentralised or Departmental Filing
Under this system every department maintains its own records. The
files and
records relating to a department are arranged and preserved in that
department
only.
Centralised and Decentralised Filing
Centralised Filing Decentralised Filing
Merits Merits
1. There is no duplication of filing 1. Saves time in filing and
obtaining
equipment and work. records when departments are
not located nearby.
2. Better utilisation of storage 2. Departmental secrecy can be
space is possible. maintained.
3. There is saving in the cost of 3. Specialised knowledge of the
records management. staff about the department
prevent errors in filing.
4. Ensures uniformity and standar- 4. There is flexibility as regards
the
disation of filing operations, time of using and returning
hence greater efficiency. records.
5. Trained personnel with speciali- 5. Ensures prompt availability of
sation lead to increased efficiency records.
6. There is better supervision and 6. This is not possible.
control by expert supervisors.
Demerits Demerits
1. Lack of specialised 1. Duplication leads to increased cost
departmental knowledge of of equipment and records.
the operating staff.
3. There may be great delay in 2. Lack of specialisation of personnel
records being made available to in filing work.
departments when they are not
located nearby.
52 :: Commerce (Business Studies)
3. Strict rules regarding use and 3. Standardisation and uniformity in
return of files may cause filing work is not possible when
inconvenience to departments. each department is free to adopt
its own system of filing.
4. It may be difficult to operate a 4. Expert supervision is lacking.
centralised filing system if
records are frequently needed
by many departments.
5. It is difficult to maintain 5. Confusion may arise in filing
secrecy. documents concerning more
than one department
Both centralised and decentralised filing systems have their own
advantages and
disadvantages. The choice between the two depends on size, nature and
needs
of an office. A combination of central and departmental system may be
used
in practice. Decentralised filing is particularly suited for big
organisations for
confidential papers, for departments located at different places, and
when
documents and papers are frequently required for reference.
Intext Questions 30.1
1. Fill in the blanks.
(a) The process of arranging and storing records is known as
__________.
(b) The major objectives of filing are proper arrangement, careful
storing and easy __________ of records.
(c) Under __________ filing system every department maintains its
own records.
(d) Under __________ filing all records of the office are preserved
in filing department.
(e) The filing system should occupy __________ space as modern
office space is very costly.
2. Match the following
Term Statements
(a) Filing (i) It protects the documents against the
possible losses and damages.
Systems of Filing and Indexing :: 53A
(b) Objective of Filing (ii) Departmental secrecy is maintained.
(c) Characteristic of a (iii) Delay in supplying information to
good filing system. departments.
(d) Merit of decentralised (iv) All office records are to be
filing preserved for future reference.
(e) Demerit of centralised (v) The system should be capable of
filing expansion if needed.
30.4 Classification and methods of filing
Classification of documents is necessary to ensure prompt availability
of records.
Classification is the process of selecting headings under which
records and
documents are grouped on the basis of common characteristics before
filing.
For example, letters may be classified on the subject of
correspondence.
The main systems of classification of files in an office are :
i) Alphabetical
ii) Numerical
iii) Geographical
iv) Subjectwise
i) Alphabetical Filing
According to alphabetical classification, letters from different
parties or
relating to various subjects are arranged and put in different file
covers
on the basis of the first alphabet with which the name of the party or
subject begins. The first alphabet of the name or surname or the
subject
is the preliminary guide to the position of the file. For example, all
papers pertaining to Atma Ram & Sons may be filed in a folder marked
‘A’ or ‘At’. Within each file, papers are arranged datewise. In a
large
office 26 English alphabets are divided into small equal parts like
(Ab-
An), (Ap-Ay), (Ba-Bn), (Bo-By), etc. Guide cards are used to divide
the letters.
The main advantages of this system are: (i) it is simple and easy to
operate; (ii) separate index is required; (iii) new names can be added
as necessary and there is little chance of wrong filing. This type of
classification is found in the telephone directory and dictionary.
Difficulty
arises when the name is very common or if the name is spelt wrongly.
It may also be difficult to anticipate the space requirements.
54 :: Commerce (Business Studies)
ii) Numerical Filing
Under this system files are arranged numerically, each correspondent
or
subject being allotted a number. The files are placed in a numerical
order in the drawers. For example, a customer, D.K. Sharma, may be
alloted No.25, so that all papers relating to him may be found in
folder
no. 25. A simple index or card index is required to identify the
numbers
with the names. When any file relating to (say) a customer is needed,
the name of the party may be located in the index and the number of
the relevant file ascertained.
The merits of this method of classification are:(i) It is simple to
operate;
(ii) Files can be easily located, removed and replaced; (iii) It is
very
elastic, and expansion is easy. The index provides a complete list of
correspondents and customers. There are also certain disadvantages of
the system. A separate index is necessary, and it takes time to refer
to
the index. It needs more space and numerical transposition of figures
is possible as 298 instead of 289.
(iii) Geographical Classification
In the geographical method, correspondence is classified according to
geographical areas, regions or states. Files may be marked zonewise
i.e.
North, South, East or West, or Statewise, or Citywise. All
correspondence relating to a particular area are kept in one file.
These
files may then be arranged alphabetically like Andhra Pradesh,
Arunachal
Pradesh, Assam, Bengal, Bihar etc.
Geographical classification offers a number of advantages. It is easy
to
operate. There is speedy location of files and direct filing is
possible.
There are certain limitations also, like greater possibility of error
where
knowledge of geography is weak, necessity of a separate index, etc.
(iv) Subject classification
Under this system, papers are grouped according to the subject. The
subjects are filed in alphabetical order e.g. Accounts, Audit, Bills,
Bonus
etc. This method is particularly suitable when the subject is of
greater
importance than the name or location of the correspondent. It can be
used with advantage in most offices along with the other
classification
systems.
The merits of the system are: (i) convenience of reference when the
subject is known; (ii) There is scope of expansion without disturbing
the existing files. The main demerits are difficulty of
classification, not
suitable for miscellaneous papers, index is needed and frequent cross
referencing maybe necessary.
Systems of Filing and Indexing :: 55A
Methods of Filing
After classification, files must be preserved carefully to prevent
loss or damage.
There are old filing methods like spike or wire file, folder file,
pigeon
hole file, box file, guard book file, expanding case file, and arch
leaver
file. These methods are briefly described here.
Spike or Piller and Post File: A thick steel wire with one sharp end
and a wooden, plastic or steel round at the other end is used for
filing.
It is placed on a desk or is hanged on a nail fixed on the wall after
filing
is done.
Folder File : There are covers of card board or thick paper fitted
with
metal hinges for fastening the papers together. A separate folder is
allotted to each customer. All the letters relating to that customer
are
kept in the file datewise. The papers are punched and then inserted.
The papers lie flat one above the other. These folders are placed
horizontally in drawers.
Pigeon Hole File: It is a special almirah or cupboard divided into
number of small compartments. It is open from one side and the
compartments are square holes called ‘pigeon holes’. Each pigeon hole
bears a letter of the alphabet. When letters are received they are
sorted
according to the alphabet or subjectwise. For example the letter
received
form Tushar & Co. is inserted into the hole marked with ‘T’. Brief
particulars are also recorded on each letter. This recording is known
as
docketing. This method is used in post office for sorting letters.
Box File: Box file, as the name suggests, is made in the shape of
boxes. Quite often papers are first put into folders and then they are
placed in box file. It helps to preserve papers better as they are
safe
and gather less dirt. For classification purposes, papers relating to
different subjects can be folded. This method is useful for travelling
agents and where correspondence is stored temporarily.
Guard Book File: Under this method, the paper or vouchers are pasted
in bound book datewise. This method is often used for recording
minutes
and preserving receipts and vouchers. It avoids the possibility of
loss or
misplacement of any paper.
Expanding Case File: Under this method, the papers are usually placed
alphabetically in numbered or lettered pockets of cases. This
equipment
is useful for filing papers in transit. These cases or pockets can be
useful for keeping papers together for temporary purchases. These
cases
can expand as per the need.
56 :: Commerce (Business Studies)
Arch Lever File: These are strong card board folders containing strong
metal arches. These arches can be operated by a lever. When a paper
is to be filed, it is punched with two holes with punching machine.
The
lever is then moved upward which opens up the metal arches or springs.
After paper is inserted through the holes the lever is pressed down to
close the spring. The papers in the file lie flat one upon the other.
The old methods of filing described above have limited use and are
suitable only for small concerns. Even then these are being replaced
by
modern methods.
The modern methods of filing used in offices, big or small, may be
classified into two categories:
i) Horizontal Filing
ii) Vertical Filing
i) Horizontal Filing
In this system papers are kept in file covers or folders one upon the
other in horizontal position. The papers are kept in chronological
order
inside cardboard file covers. The papers are held together by metal
hinges or levers. The files are then kept in cupboards in a horizontal
position one above the other. When any paper is required, the relevant
file is taken out and after use it is put back in the same position.
Merits and Demerits of Horizontal Filing
The advantages of horizontal filing are:
(i) This method is simple to understand, easy to operate and
economical to
maintain.
(ii) Letters can be referred to in a file without removing them from
it.
(iii) As letters are chronologically arranged, it becomes very easy to
locate
them.
(iv) The files are well protected from dust and moisture as thick
covers and
cupboards are used.
Some of the disadvantages are:
(i) It is not very flexible.
(ii) It is difficult to remove papers from files lying at the bottom
or middle
of the heap.
(iii) This system cannot be profitably used by large offices.
Systems of Filing and Indexing :: 57A
(iv) The equipments used are space consuming.
ii) Vertical Filing
This is the most modern method of filing. In this method papers are
placed in files and kept in an upright, standing position. The folders
are
stored in specially designed cabinets. The front side of the folder is
slightly shorter. The extended part of the back is used to indicate
the
code number of the file. The drawers of the steel cabinet are deep
enough to hold the folders in vertical position. In order to divide
the
drawer into convenient sections guide cards are placed at appropriate
places. Under this method a separate folder is provided for each
customer
or subject. The folders may be arranged alphabetically, numberically,
geographically or subject-wise. This system has become very popular in
large offices and big business houses.
Merits and limitations of vertical filing
Some of the advantages of vertical filing are : (i) It is a flexible
system . (ii)
It is adaptable to various systems of classification. (iii) The
location of papers
is possible without much difficulty and loss of time. (iv) It takes
less time to
file papers in folders. (v) It provides proper safety of papers and
documents.
The Vertical Filing system is said to suffer from a few limitations as
well.
(i) The equipment used like steel cabinets etc. is more costly. (ii)
It is not suitable
for small offices. (iii) Folders may slip down the drawers and get
misplaced.
There are certain adaptations of the vertical filing system such as
Suspension
Filing, Lateral Filing, Open Shelf Filing, Visible Records Filing,
Rotary Filing,
etc.
Suspension Filing: This method of filing with the help of suspended
folders is also called hanging filing. The outer edges of the folder
are
fitted with metallic bars with hook-shaped ends so that it can be
suspended or hung on rails. When hung the folder becomes a suspended
pocket where loose papers can be kept. At one of the side bars, a
metallic plate is attached indicating the title or code number of the
folder.
Lateral Filing: In this system files are arranged side by side in very
much the same manner as books on shelves. Each file is fitted with an
adjustable title holder. Simple, suspension folders are used in
containers
like cupboards, racks or open shelves. The folders are hung on the
railing of the shelves. It is economical because it occupies less
space.
All the files are visible simultaneously.
Open Shelf Filing: Open shelf (as used in libraries) are used for
storing
58 :: Commerce (Business Studies)
folders. Open shelves can go upto the ceiling level and between two
rows of shelves, space is left for movement. Ladders can also be used
where the shelves are high. The files are kept vertically. The system
is
economical since the equipment itself is cheaper and can accommodate
more files.
Visible Records Filing: In this system files are so arranged that they
overlap one another leaving the top or bottom edges exposed for easy
and quick reference. Descriptions of records like—name of
correspondent, file number, subject etc. are written on these exposed
edges for ready reference.
Rotary Filing: In this system files are attached to belts or series of
rings which are connected to a wheel. The clerk has simply to rotate
the
wheel to get the file quickly. Motorized filing equipment is also
available
which is electrically operated. The files are so arranged and stored
that
the operator, simply by pushing a botton or dialing a letter, gets the
required file at hand. The operator needs special training and the
equipment used is very costly.
Use of Computers for storage of information
Many Organisations today have electronic computers, which, among other
things are also used for storage of information or records. When the
recorded information is keyed into the computer or Word processor, it
is displayed on the computer screen. It can be reproduced in the form
of printed documents, if necessary. Some of the recorded information
may be required for repeated use. That may be stored in the internal
memory of the computer. However, to store it permanently, the
information
has to be from internal storage to a disc or floppy. Whenever required
the information can be retrieved (recalled) by using the disc or
floppy.
Filing Routine
Since the filing system is the ‘memory’ of the organisation, it is
obviously
important that its routine should be prepared very carefully by the
management.
Designing a filing routine is usually the joint responsibility of the
manager and
qualified personnel and representatives of different departments. The
routine
should include decisions regarding activities in a proper sequence
such as:
— The first step is to give instructions in proper form by a
responsible
officer for filing the paper. The instructions should bear the
signature
and date of the officer. No document should be filed without such an
instruction.
Systems of Filing and Indexing :: 59A
— The second step is to classify the paper on the basis of
predetermined
system of classification i.e. alphabetical, numerical, geographical or
subject
wise. The paper should be filed in the folder at a proper place.
Entries
in the Receipt Register is to be made regarding ‘File Head’ and
‘Disposal’ for each document.
— The third step is to mark file head and purpose on the letter or
document
on a blank space with the help of a rubber stamp. This will serve as
indexing of papers filed.
— The fourth step is to identify the urgency of disposal of different
letters
and papers. Most urgent letters may be disposed off first on priority
basis and less important ones may wait.
— The fifth step is to attach follow-up slips to different papers
received as
some letters like purchase order, dunning letter etc. require
immediate
action. The concerned officer notes down these remarks on the papers.
— Any paper which needs the relevant file for studying the full case
should be sent to the concerned officials along with the file for
necessary
action and an ‘out’ guide card should be prepared and kept in place of
the file issued. Signature of concerned person should be obtained
while
sending a particular file through the Peon Book. No file should be
issued without a requisition slip.
— The receiver should check the contents before taking file to his
department.
— As and when the complete file is received back, the same may be kept
in its original place and the ‘out’ guide card may be removed.
— Lastly periodical disposal of obsolete or dead files is also a
necessary
step in a filing routine. The dead files are destroyed as per the
policy
of the organization.
Intext Questions 30.2
1. Fill in the blanks.
(a) If the records are placed in different files on the basis of
initial
letter, the system is known as __________ filing.
(b) The numerical filing system takes time in referring to the
_________.
(c) Under __________ filing, papers are kept in containers one upon
60 :: Commerce (Business Studies)
the other in flat position.
(d) In __________ filing, papers are placed in files and kept in an
upright position.
(e) The equipment used for filing papers in transit is called
__________ file.
2. Match the following.
Terms Statement
(a) Numerical Filing (i) A thick steel wire is used for filing.
(b) Geographical Filing (ii) The papers are pasted in bound book
datewise.
(c) Spike File (ii) Under this system files are arranged
numberically.
(d) Pigeon Hole (iv) Files may be marked zonewise —
north, south, east and west.
(e) Guard Book (v) The method is used in Post Office
for sorting letters.
30.5 Indexing
Meaning and Purpose
Indexing is an important aid to filing. Filing and indexing are so
interrelated
that filing without indexing is incomplete and indexing without
filing does not exist.
Indexing is the process of determining the name, subject or other
captions
under which the documents are filed. Index is a guide to records. The
main purpose of an index is to facilitate the location of required
files
and papers. Index helps the staff to find out whether a particular
file
exists for a party or subject, and its place in the container. It also
facilitates cross referencing. Where records are classified in
numerical
order, or subject wise an index is necessary.
The purposes served by indexing are as follows:
(i) easy location of files and documents
(ii) speedy cross-referencing
Systems of Filing and Indexing :: 61A
(iii) saving of time and effort in locating records
(iv) efficiency of record keeping
(v) reducing the operating cost of records management
A good indexing system should be simple, economical, safe, elastic and
efficient.
It should provide for cross referencing of files. Tabs, guides or
slips should be
used for indications for quick referencing.
Types of Index
Various types of indexes are used in different offices according to
their
requirements. The main types of indexes are:
1. Ordinary Page Index
(a) Bound book index
(b) Loose leaf index
(c) Vowel index
2. Vertical Card Index
3. Visible Card Index
4. Strip Index
5. Wheel or Rotary Index
1. Ordinary Page Index
It is similar to the subject index given at the end of standard books
in
which the subject matter is alphabetically arranged and then relevant
page numbers are given against each heading or sub-heading. Some
times it consists of specially designed pages fitted with a tab
indicating
an alphabet and on each page the names or subjects starting with that
alphabet are written along with the page numbers. This type of index
can be (a) Bound Book index, (b) Loose Leaf index, or (c) Vowel
Index.
(a) Bound Book Index: Under this system, index is prepared in a
bound book or register divided into alphabetical sections in which the
names or documents are entered. Each section has the leaves cut away
at the right hand side so that the initial letters of all the sections
are
visible at a glance. All entries relating to a letter or alphabet are
arranged
in the same section or page reserved for it.
The merits of this method are: (i) It is a very simple method of
indexing;
(ii) No special training is required of the staff; (iii) It is very
economical
62 :: Commerce (Business Studies)
as it does not need costly equipment. (iv) It is compact and handy and
can be used for a long period; (v) It is popular in small
organisations.
The main drawbacks are : (i) It is not flexible and cannot be expanded
beyond a limit; (ii) Alteration is not possible if anything has been
wrongly
entered. Dead subjects cannot be deleted; (iii) The location of names
is
difficult as they are not entered in alphabetical sequence; (iv) It is
suitable
for small offices only.
(b) Loose-Leaf Index: This is an improved version of the bound book
index. The bound book becomes inconvenient to handle if it is too big.
In loose leaf index single sheets are punched to fit in between metal
hinges with the help of a metal screw. Pages are loose so that any
page
can be taken out or additional pages inserted. To insert or remove the
pages the metal hinges have to be unscrewed. The binder with the loose
index sheets can be locked so that no one can take out any sheet
without having authority to do so.
The main advantages of loose-leaf index are : (i) This method provides
for maximum flexibility and can be adapted to suit the needs. (ii) It
is
convenient to handle and provides quick and easy reference. (iii) Dead
records can be withdrawn and stored at the back. (iv) It is more
economical than other methods of indexing. (v) The sheets can be used
for many different purposes such as keeping additional information
regarding a customer e.g. credit rating, telephone number, postal and
telegraphic addresse etc.
The main drawbacks are : (i) It takes longer to locate a particular
index
page. (ii) Through constant handling the sheet may be damaged. (iii)
There is a possibility of the sheets being misplaced after they have
been
taken out. (iv) If pages are used for multiple purposes, there are
chances
of committing errors.
Vowel Index: It is a modification of the book index. In big
organisations
which deal with large correspondence, the index book is maintained on
the basis of vowel classification in order to facilitate quick
reference.
The section of book reserved for an alphabet is subdivided into
subsections,
each of which is reserved for a vowel, that is, a,e,i,o,u and y.
The page is first selected by the initial letter and then by the vowel
occurring after the initial letter, For example, the name ‘Gandhi’
will be
recorded in the section reserved for ‘G’ and in the vowel sub-section
‘a’. The system is simple, easy to operate, economical, and suitable
for
large organisations. but it is not suitable for small offices.
Systems of Filing and Indexing :: 63A
2. Vertical Card Index
Under this system each subject, customer or document is allotted a
separate card on which necessary information appears. The cards may
be of small size (12.5 cms x 7.5 cms) or as per need. They are
classified
and arranged alphabetically, numerically, geographically or
subjectwise.
The alphabetical classification is more popular. In some cases more
than
one card may be prepared for the same set of information and each
card may be arranged in different manner e.g. in library usually two
cards are prepared for each book — one is arranged on the basis of
author and the other on the basis of title of the book. The cards are
filed vertically in steel or wooden drawers. A hole is punched into
each
card to keep the card in its proper place. Guide Cards may be used to
indicate groups of cards in a class. This type of index is very
popular
in big offices.
It has many advantages. (i) It provides for flexibility as the number
of
cards can be increased or decreased without disturbing the
arrangement.
(ii) It is economical to operate (iii) It is simple and easy to
understand.
(iv) The system can be used for many different purposes. (v) Dead
records can be withdrawn at any time. (vi) It can be used by several
persons at the same time. (vii) Cards can be arranged in any order.
It suffers from certain limitations. (i) All the cards are not visible
at a
glance. (ii) Cards may get lost or damaged since removal of cards is
easy. (iii) Cards may get torn due to constant handling. (iv) The
equipment
is costly. (v) A regular check is required to ensure that cards
removed
for reference are replaced in their proper places.
3. Visible Card Index
Under this system, the cards are arranged flat in a shallow tray or
metal
frame. Each card is attached to metal hinge and overlaps the one
before
it, so that name address and other particulars are visible without
touching
other cards. The frames or trays are attached vertically to the metal
stands or they can be put horizontally into cabinets. The details of
data
can be written or typed on the front or back of the cards for
reference.
The advantages are : (i) It occupies less space. (ii) The reference is
much faster. Cards are easily located. (iii) any information can be
added
without disturbing the arrangement. (iv) Out dated cards can be
removed
easily whenever necessary. (v) Its capacity is quite large. More cards
can be accommodated in the same space. (vi) It is widely used in
libraries, banks, insurance companies and other organisations.
Visible card index also suffers from certain drawbacks. (i) It
requires
costly equipment. (ii) Designing and operating the system needs
special
64 :: Commerce (Business Studies)
training. (iii) Making entries on cards takes more time.
4. Strip Index
In every office there is need for a list of names of parties to be
maintained
with their telephone numbers, addresses etc. A line entry on a narrow
strip of card board can be prepared for a single item. These strips
are
arranged in a frame in such a way that they can be taken out and
replaced with ease. Frames can be hanged on the wall or put on the
table in a book form or even arranged on a rotary stand which can be
turned round to look at any part of the index. This system is a
variation
of the visible card index, offers the same advantages and suffers from
the same drawbacks.
5. Wheel or Rotary Index
Under this method cards are arranged around the hub of a wheel which
may be portable. A single wheel can hold as many as 5000 cards. A
card can be inserted or withdrawn without disturbing the other cards.
Entries can also be made on the cards without removing from the wheel.
The merits of this system are — quick and easy referencing, economy
of time and efforts, economy of space, elasticity, etc. This indexing
system has gained popularity because it is simple to operate.
Intext Questions 30.3
1. Fill in the blanks.
(a) An important aid to filing is __________.
(b) The main purpose of indexing is for easy __________ of files
and documents.
(c) Under __________ index the register is divided into alphabetical
sections. The pages are cut away at the right hand side.
(d) Under __________ index each customer is allotted a separate
card on which necessary information appears.
(e) In __________ index names and addresses are visible without
touching other cards.
2. Match the following.
Terms Statement
(a) Self-indexing (i) The paper is die-cut to fit in between
metal hinges with the help of screw.
Systems of Filing and Indexing :: 65A
(b) Ordinary Page Index (ii) Telephone Directory is an example
of this system.
(c) Loose Leaf Index (iii) The cards are filed vertically in
steel or wooden drawers.
(d) Vertical Card Index (iv) A line entry on a narrow strips can
be prepared for a single item. The
strips are arranged in a frame.
(e) Strip Index (v) It is similar to the subject index
given at the end of standard books.
30.6 What You Have Learnt
Filing is the process of arranging and storing records so that they
can be
referred to at any time. The main objectives of arrangement of records
are :
careful storing, easy availability, ready reference, future planning,
effective control,
evidence in court and follow-up steps. Centralised filing means a
filing department
in general office, whereas under decentralised filing every department
maintains
its own records. They have their own merits and demerits.
Systems of classification of files are: alphabetical, numerical,
geographical and
subjectwise. Methods of filing are: horizontal and vertical. Old
methods of
horizontal filing are: wire file, folder file, pigeon hole, box file,
guard book file,
expanding case and arch liver file. The most modern method is vertical
filing
system. There are certain adaptations of vertical system such as
suspension
filing, lateral filing, open shelf, visible, rotary filing etc. All
the systems of
classification of files have their own merits and demerits.
Indexing is the process which helps locating the name, subject etc.
under which
the documents are filed. Indexing is necessary for easy location of
files and
cross referencing. Types of index are : ordinary page index (like
bound book,
loose leaf and vowel), vertical card, visible card, strip and rotary
index. All the
methods have their own advantages and disadvantages.
30.7 Terminal Exercises
1. Which system of filing is suitable for a small trader who receives
not
more than ten letters per month?
2. State the relative merits of centralised and decentralised filing.
3. Name the index adopted by a bank to identify the signatures of
customers.
66 :: Commerce (Business Studies)
4. Name the device which helps in locating a specific card in card
indexing
system.
5. What is vertical filing?
6. What is menat by self index?
7. State the main objectives of indexing.
8. State the situations under which decentralised filing may be
useful.
9. List the main advantages of vertical filing.
10. Distinguish between filing and indexing.
11. Briefly describe the visible card index system with its
advantages.
12. What is card index? What are the advantages of card index over
book
index ?
30.8 Answers to Intext Questions
30.1 1. (a) filing (b) availability (c) decentralised
(d) centralised (e) minimum
2. (a) iv (b) i (c) v (d) ii (e) iii
30.2 1. (a) alphabetical (b) index (c) horizontal
(d) vertical (e) expanding case
2. (a) iii (b) iv (c) i (d) v (e) ii
30.3 1. (a) indexing (b) location (c) bound book
(d) vertical card (e) visible card
2. (a) ii (b) v (c) i (d) iii (e) iv

  • CF021G THE STOCK EXCHANGE OF HONG KONG LIMITED (A
  • UNIVERSIDAD POLITÉCNICA DE CARTAGENA ESCUELA UNIVERSITARIA DE INGENIERÍA TÉCNICA
  • HÄMTAD FRÅN WWWVARGBRODERSE JAGAD AV KLANERNA ÖVERSÄTTNING BIRGITTA GAHRTON
  • MÉMOIRE CONSULTATION GÉNÉRALE ET AUDITIONS PUBLIQUES SUR LE LIVRE
  • ESF IACUC PROTOCOL PROTOCOL FOR THE HUMANE USE
  • ADUNA ALTZO ALEGIA ANOETA IRURA IBARRA VILLABONA ZIZURKIL MUSIKA
  • HLM 4 PERATURAN PEMERINTAH NO4 TAHUN1990 TENTANG PENAMBAHAN PENYERTAAN
  • S TAGE 2 BARIATRIC SURGERY REQUEST AFTER JANUARY 1
  • AYUDA MEMORIA TERREMOTO ICA EL DÍA 15 DE
  • VICERRECTORADO DE INVESTIGACIÓN Y TRANSFERENCIA SERVICIO DE INVESTIGACIÓN RESOLUCIÓN
  • INFORME DE VALORACIÓN DE TESIS DOCTORAL (REMITIR EL MISMO
  • B OSNA I HERCEGOVINA BOSNIA AND HERZEGOVINA FEDERACIJA BOSNE
  • MATEMATIKA 2 (PRO 912 LET) – LANGMASTER ÚVODNÍ OBRAZOVKA
  • R EADING FOOTBALL CLUB JOB DESCRIPTION JOB TITLE
  • MEMS COURSE LIST FALL 2011 THIS COURSE LISTING IS
  • 3RD DECLENSION ISTEM NOUNS SOME 3RD DECLENSION NOUNS HAVE
  • EMPRESAS EXPOSITORAS STAND EMPRESA ESTADO GIRO 211 ABC INSTITUTE
  • WWWRECURSOSDIDACTICOSORG A NÚMEROS PRIMOS SE LLAMA ASÍ A CUALQUIER
  • PRILOG 1 PODACI O PONUDITELJU PODACI O PONUDITELJU
  • THE PLACENAMES OF ALDHAM RECORDER JAMES KEMBLE ESSEX PLACENAMES
  • ZAŁĄCZNIK DO ZARZĄDZENIA NR 5 Z DN 2203 2021
  • PARA Y 1 DE VERDE ME VOLVÍ NEGRA Y
  • PROMOTION OF ADMINISTRATIVE JUSTICE ACT ADMINISTRATORS’ GUIDE THE PROMOTION
  • CONSEJERÍA DE EDUCACIÓN I E S LOS BOLICHES
  • PÁGINAS PARA CONSULTAR HOTELES U HOSTALES HOTELES CON CONVENIO
  • A RTÍCULO “EL PROFESOR DE EDUCACIÓN FÍSICA ANTE LOS
  • ENCYCLOPEDIA OF COMIC STRIP HEROES AND VILLAINS STORY COMIC
  • STATIONSWEG 53 ZONNEDAUW 4A 1851 LJ HEILOO 1906 HA
  • OPĆINA DUBRAVICA ZAHTJEV ZA DODJELOM BESPLATNIH UDŽBENIKA (BEZ RADNIH
  • POWERPLUSWATERMARKOBJECT3 PUBLIC ROADS AND TRANSPORTATION PUBLIC ROADS AND TRANSPORTATION