PEEK TAPE DATA SHEET Product Description Extruded

peek tape data sheet ==================== product description: -------------------- extruded, virgin peek (polyethetherketone) film

PEEK TAPE DATA SHEET
====================
Product Description:
--------------------
Extruded, virgin PEEK (polyethetherketone) film has been surface
modified on one side and coated with an Acrylic or High Temperature
Silicone adhesive. The acrylic adhesive is resistant to high humidity
and harsh chemical environments while retaining good peel strength
with clean removal. Silicone Adhesive has low residue upon removal and
withstands temperatures from -100F to +450F.
The surface modification enhances bond strength to other materials.
Peel-off liner is applied to the adhesive side. The untreated side is
lubricious, abrasion resistant, and free of pin holes. Series #37-_A
(Acrylic) or 37-_S (Silicone)
Performance & Application Information:
This tape has the best combination of friction and wear properties
combined with high heat resistance (350F with Acrylic Adhesive; 450F
with Silicone Adhesive), chemical resistance and electrical
insulation. Tapes can be used on many different hard mating surfaces
such as steel, ceramic or glass. Typical applications for the tape
include sliding bearings, abrasion resistant wire wraps and oil field
equipment requiring abrasion resistance and electrical insulation.
TYPICAL PROPERTIES PEEK Tape with Adhesive
Property
Test Method
Data
Backing Material
VICTREX® PEEK Film
Backing Thickness
.002
Adhesive System
Acrylic or Silicone
Adhesive Thickness (in)
.002", .005", .010"
Adhesion (oz/in.)
ASTM D-1000
50 - Acrylic; 30- Silicone
Tensile Strength (lb/in)
ASTM D3759
36
Elongation (%)
ASTM D3759
165
Dielectric Strength (volts)
ASTM D149
8800
Max. Operating Temperature (°F)
350F- Acrylic; 450F - Silicone
AVAILABILITY
Core I.D. (in)
3
Width (in)
.25 up to 24
Roll Length (yd)
36
Release Liner
Kraft Paper- Acr; No Liner-Sil
Note: The above are “typical values” which have a nominal range about
them and are not intended for specification purposes.
VICTREX PEEK® is a registered trademark of Victrex™, USA