Name Date Manuals And Order Parts Objective

name: _______________________________________ date: _____________________ manuals and order parts objective: to familiarize yourself wi

Name: _______________________________________ Date:
_____________________
Manuals and Order Parts
Objective: To familiarize yourself with engine manuals and how to look
up and order parts for small engines. You will use the Briggs website,
advanced product manual and an illustrated parts manual.
Please refer to your engine in the shop to find the following:
Model: __________________ *This is the most important number*
Type: ___________________
Code: ___________________
*Hint, if you go to www.briggsandstratton.com and click the “Find Your
Model Number” under the search bar in the upper right hand corner, it
will help with finding where this information is on your engine.
Part 1: How to look up and order parts.
For this you will use the illustrated parts manual and the
briggsandstratton.com website. First use the manual to find the
reference and part numbers for the listed parts. Then go to the Briggs
website and hover over “part” in the top right hand corner, then click
on “repair parts”. Then you can select Briggs & Stratton Engines and
type in your part number to get a price.
Part
Parts Diagram Reference Number
Part Number
Price
Spark Plug
Engine Gasket Set
Carburetor
Piston Rings
Starter Rewind
Armature-Magneto
Fly-Wheel Key (this is the hardest to find)
Part 2: Engine Specs
Find out the following information about your engine for when
troubleshooting and putting engines back together. Use the Advanced
Product Service Manual. Make sure to be looking under the correct
model number! Make sure to include units (ex: mm or inches etc)
1.
Is this a snow series or snow series max engine? How do you know?
2.
What tool size would you use to take off the following parts:
a.
flywheel nut: ____________
b.
Armature: ____________
c.
Cylinder Head: ____________
d.
Muffler: ____________
e.
Spark Plug: ____________
f.
Blower Housing: ____________
g.
Fuel Tank: ____________
3.
What would you torque the following parts to (make sure to use
units)?
a.
Flywheel nut: ____________
b.
Connecting Rod: ____________
c.
Crankcase Cover: ____________
d.
Cylinder Head: ____________
e.
Spark Plug: ____________
4.
What should the following dimensions be for the engine (use
units!)?
a.
Cylinder Bore: ____________
b.
Crankshaft PTO Journal: ____________
c.
Starter Rope Length: ____________
d.
Exhaust Valve seat angle: ____________
5.
What should the spark plug gap be for this engine?
6.
What should the armature air gap be for this engine?
7.
What is the valve clearance for the intake and exhaust valves?
8.
What type of Governor System does this engine have?
9.
What type of lubrication system does this engine have?
10.
How much fuel can the gas tank hold?