Unit 1HK2/10 (F98M 04) Clean Windows From The Inside

unit 1hk2/10 (f98m 04) clean windows from the inside this unit is about cleaning the inside surfaces of windows, using appropriate cle

Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
This Unit is about cleaning the inside surfaces of windows, using
appropriate cleaning equipment and materials. The Unit does not
require you to work above hand reach height.
When you have completed this Unit, you will have proved you can:
*
1HK2/10.1 Prepare to clean windows from the inside
*
1HK2/10.2 Clean the inside surfaces of windows
Assessor feedback on completion of Unit
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
I confirm that the evidence detailed in this Unit is my own work and
meets the requirements of the National Occupational standards.
Candidate Signature Date
I confirm that the candidate has achieved all the requirements of this
Unit.
Assessor Signature Date
Countersigning Assessor Signature (if applicable) Date
I confirm that the candidate’s sampled work meets the standards
specified for this Unit and may be presented for external
verification.
Internal Verifier Signature Date
Countersigning Internal Verifier (if applicable) Date
External Verifier Initial and Date (if sampled)
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
What you have to do
What you must cover
The assessor must assess statements P1–P3 and P5 by direct
observation.
Element 1 — Prepare to clean windows from the inside
1.
Prepare your working area and equipment.
2.
Inspect the surface to be cleaned.
3.
Identify any damaged or loose surfaces.
4.
Report damaged or loose surfaces to the relevant person and ask
for advice.
5.
Choose cleaning materials and methods that are appropriate to your
work schedule, the type of dirt and the surface you are going to
clean.
The assessor must assess statements P6–P8 and P10–P12 by direct
observation.
Element 2 — Clean the inside surfaces of windows
6.
Apply the cleaning agent to the surface in a controlled way,
following the manufacturer’s instructions and recommendations.
7.
Loosen dirt that is stuck on to the surface without causing
damage.
8.
Clean thoroughly and remove any dirt without damaging the surface.
9.
Report any dirt that you cannot remove to the relevant person.
10.
Leave windows and glass dry and smear free.
11.
Make sure that frames and sills are dry.
12.
Put the work area back as you found it.
Element 1 — Prepare to clean windows from the inside (C1–C4)
Element 2 — Clean the inside surfaces of windows (C2 and C4)
There must be performance evidence, gathered through observing the
candidate’s work for:
C1 Preparation of work area (at least two from)
(a) use of protective clothing
(b) put up hazard warning signs
(c) protect surrounding areas
C2 Surfaces (at least both from)
(a) windows
(b) window frames
C3 Cleaning equipment and materials (at least two from)
(a) cloths
(b) cleaning chemicals
(c) squeegees
C4 Dirt (at least one from)
(a) loose dirt
(b) dirt that is hard to remove
Evidence for the remaining points under ‘what you must cover’ may be
assessed through questioning, witness testimony or simulation.
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
Evidence number
Evidence description
Date
What you have to do
What you must cover
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
At least two observations from
At least both must be observed
At least two observations from
At least one observation from
C1 a
C1 b
C1 c
C2 a
C2 b
C3 a
C3 b
C3 c
C4 a
C4 b
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
What you have to know
Knowledge Statements marked by  cannot be inferred
Completed date or appendix
For the whole Unit
K1* Your organisations standards for windows.
K2* How frequently windows should be cleaned in your organisation.
K3* Why you should wear protective clothing when cleaning.
K4* Why you should not mix cleaning materials.
K5* Why you should follow manufacturers’ instructions when using
cleaning equipment and materials.
K6* The types of problems you might come across when cleaning windows
and how to deal with these.
K7* What to do if window areas are above hand reach height.
For Element 1
K8* Why it is important to prepare windows and surrounding areas for
cleaning.
K9* Why you should identify and report any loose or damaged surfaces.
K10* The types of equipment and materials you should use for loose
dirt and dirt that is hard to remove.
For Element 2
K11* Why you should report any dirt that you cannot remove.
K12* Why you should leave frames and sills dry.
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside
Supplementary evidence
Evidence/Question
Answer
Date
1
2
3
Evidence must come from candidate’s work in the associated work area.
There must be sufficient evidence for the assessor to judge that the
candidate can achieve the required standard on a consistent basis.
Unit 1HK2/10 (F98M 04) Clean Windows from the Inside 6
© SQA 2010